
Metal Roofing in Treasure Island, FL
Built for Salt Air, Filed With the City.
Metal roofing on Treasure Island answers to salt from two directions and to a city permit desk that wants a flood worksheet and deck photos on every reroof. We drive over from Kenneth City to build it, and it comes with our 15-year workmanship warranty in writing, added to the manufacturer's coverage.
Takes about 30 seconds. A local roofing specialist follows up the same business day.
Metal roofing in Treasure Island, FL is a different job from the metal roofs we put on in Kenneth City, even though the island is only about 17 minutes from Town Hall. On a Kenneth City ranch house the metal mostly fights sun and wind. On Treasure Island it also sits in salt air every day, under a city permit process that asks for a flood worksheet and nailing photos on every reroof. This page is about those differences. For the inland version, see our metal roofing page, and for every other roof on the island, our Treasure Island roofing company page.
Metal Roofing on Treasure Island, Seen From Kenneth City
Our own town sets the baseline. Kenneth City homes date to about 1964 on average, a little over half are detached houses, and salt barely figures in the choice of panel. A metal roof there is mainly about clips, edges and a deck that has carried several shingle roofs.
Cross the causeway and the list grows. Treasure Island is a narrow barrier island with the Gulf on one side and Boca Ciega Bay on the other, so salt reaches a roof from both directions. FEMA’s flood map shows AE and VE zones there, plus shaded X, and the city says all of Treasure Island is in a floodplain. Roof permits come from the city’s own Community Development office instead of Pinellas County. None of that changes how a standing seam roof is put together. It changes what it is made of and what the permit file has to show.
One Metal Roof, Two Addresses
- Kenneth City ranch houseInland, about 1964 on average; sun, rain and wind drive the design
- Treasure Island houseSalt from the Gulf and from Boca Ciega Bay settles on the panels
- Flood map on the islandAE, VE and shaded X zones; the city treats the whole island as floodplain
- Who reviews the permitPinellas County for Kenneth City; Treasure Island's own Community Development office
Salt Never Rests: Panels, Finish and Fasteners
Salt doesn’t hurt a metal roof all at once. It settles as a fine film, pulls in moisture overnight and sits on every seam and screw head until a heavy rain rinses it. On an inland Kenneth City roof that film is faint. On Treasure Island it’s a daily coat.
So the panel metal is the first choice we talk through. Aluminum carries no iron, so it can’t rust, and on most island lots it is where we start. Coated steel relies on a metallic layer under the paint. It does well away from the water, but cut edges, scratches and screw holes are where the steel shows through, and near salt those spots go first. If your lot sits far enough back for the finish warranty to cover steel, we price it too and say so in writing.
The finish comes next. We quote the most salt-tolerant paint system offered for the panel and read its salt-exposure terms for your address before you choose a color, because many finish warranties narrow near salt water.
Then the small parts. Two different metals touching in damp salt will corrode the weaker one, so clips, screws, trim, drip edge and flashing are stainless or matched to the panel metal. Panel ends at the eave are folded so no raw edge faces the weather, and the ridge closures are sealed so wind can’t drive salt and sand up into the seams. Edges get tighter clip spacing too, because uplift is worst along eaves, rakes and corners. After a named storm, a free roof inspection checks those edges and ends with a documented photo report you can share with your insurer if you choose to file; the claim stays between you and them. If panels or trim have moved, storm damage roof repair is the next step.
What Changes on an Island Metal Roof
- Panel metal
- Aluminum is the usual pick close to salt water; coated steel suits lots farther back
- Finish
- The most salt-tolerant paint system offered for the panel, named on your quote
- Fasteners and clips
- Stainless or matched to the panel metal, so no two metals react
- Panel ends
- Folded or closed off so no raw cut edge faces the wind
- Upkeep
- A light hose rinse under overhangs and porches where rain can't reach
What the City’s 50% Worksheet Looks Like With Metal on It
Every reroof permit on Treasure Island carries a FEMA Cost Breakdown Worksheet for substantial improvement and substantial damage, with SI/SD affidavits from the homeowner and from the contractor. The city’s line is 50%: when the cost of the work equals or exceeds half the structure’s market value, the building has to meet current flood rules. The city also says it tracks maintenance work against that line.
Choosing metal over shingle puts a bigger roofing number on that worksheet. For most houses on the island, a roof by itself still lands well below half the structure’s value. Two cases are worth a closer look: an older cottage whose building value is modest, and a house where interior repairs or other permitted work are part of the picture. That is why we send the metal and shingle prices together, in writing, before anything is filed. The worksheet uses the same locked price you sign. If the house has had other permitted work, tell us, and we’ll ask the permit office how it is treated before you commit.
The 50% Line on a Treasure Island Metal Reroof
Deck Nailing Photos Come Before the First Panel
Once standing seam goes on, nobody sees the deck again for decades. Treasure Island’s forms are built around that. The city wants an in-progress affidavit with pictures of the deck nailing before a final inspection can even be requested. Its notarized roof affidavit asks for photos of each plane of the roof, with the permit number or the address number marked on the deck so it shows in the shot, and that affidavit has to be at the house for the final.
On a metal job, the order of work lines up with those forms. We tear off to bare sheathing on every plane, cut out sheets that are soft or delaminated and re-fasten the deck, tightest at the edges. The marked photos are taken at that point, while the wood is still open. Then the secondary water barrier Florida requires goes down, followed by a high-temperature underlayment made for metal, the clips and finally the panels.
This step matters more on the island than people expect. About half of Treasure Island’s homes were built before 1970, so many decks have been under three or four roofs. The same photos go into your homeowner portal, which means you can see your own deck nailing long after it disappears under metal.
The Deck, in the Order the City Sees It
- Tear-offOld roofing off down to bare sheathing on every plane
- Deck repairSoft or delaminated sheets cut out and replaced
- NailingDeck re-fastened, tightest at edges and corners
- Marked photosPermit or address number written on the deck so it shows in each plane's photo
- In-progress affidavitDeck nailing pictures in hand before a final can be requested
- Then the cover-upSecondary water barrier, high-temperature underlayment, clips and panels
Which Treasure Island Buildings Take Standing Seam
Census estimates for 2020 to 2024 count about 6,200 homes on Treasure Island. About 1 in 3 is a detached house, another 540 or so are attached homes like townhouses, and about 2,070 sit in buildings of 2 to 19 units. Roughly 1 in 5 is in a building of 20 or more units.
Standing seam needs real pitch to shed water, so it fits the detached houses, the duplexes and the small pitched-roof buildings best. That covers most of the island by count. The condo towers usually carry low-slope roofs, and those belong with our flat roofing and commercial roofing work. In between are small buildings with a pitched main roof and a flat section over a porch or stairwell. We price those as two systems joined with flashing, and the quote shows which part gets which.
When several owners share one roof, the decision belongs to whoever governs the building, whether that is the owners together or an association board. We measure the whole roof and price it once, so the group compares the same numbers.
Treasure Island Housing (Census ACS 2020 to 2024)
- Housing units
- About 6,200
- Detached houses
- About 2,200, roughly 1 in 3 homes
- Attached homes
- About 540
- Buildings of 2 to 19 units
- About 2,070 homes
- Buildings of 20 or more units
- About 1,300, roughly 1 in 5 homes
- Median year built
- 1970
A Metal Roof for an Owner Who Is Off the Island
About 3 in 10 Treasure Island homes are kept for seasonal or occasional use. In Kenneth City it’s about 1 in 20. That gap changes how a metal job runs, because many island owners are somewhere else while the roof goes on.
You don’t need to be here. You choose your option and sign it from your phone, and the price is locked once we send it. The homeowner portal keeps the schedule, our messages, the permit documents and the photos of each hidden layer: deck, barrier, underlayment and clips. Cleanup is included, so the lot is clear when you get back. If an association has to approve the color or profile, start that letter early, because panels are ordered only after approval is in writing.
Running the Job from Out of Town
- SigningGood, Better, Best options signed on your phone, price locked once sent
- WatchingDeck, barrier and clip photos in the portal before panels hide them
- PaperworkPermit, worksheet and closed-out file stored in the portal
- Leaving it tidyCleanup included, so the lot is clear when you come back
Metal on New Island Houses After Helene
Helene damaged 3,195 homes on Treasure Island, more than 2,000 of them with major damage, Fox 13 reported. By Sept. 15, 2025, the city had issued 3,443 permits and nearly 400 demolition permits. Some of those lots now hold new houses.
A metal roof on a rebuild is a different job from a metal reroof on a surviving 1960s house. There is no old deck to repair, and the roof can be drawn for metal from the start: pitch, overhangs and ridge set so standing seam lays out cleanly. Bring us the plans before the framing is final. On a surviving house, the deck work in the section above is where most of the effort goes.
Treasure Island Rebuilding (Fox 13, Sept. 2025)
- Homes damaged by Helene
- 3,195, more than 2,000 with major damage
- Permits issued by Sept. 15, 2025
- 3,443
- Demolition permits
- Nearly 400
- For a metal roof
- New frames let the roof be planned for metal before it is built
Weighing Metal Roofing on Treasure Island Against Shingle and Tile
Metal isn’t automatically the answer on the island, and we don’t quote it that way. Your roof gets measured one time, from high-resolution satellite imagery, and checked in person at the free inspection. That single set of numbers is priced three ways: standing seam, architectural shingles and tile, each with identical deck repair underneath. Each comes as a Good, Better or Best option with monthly payment options, and there is no pushy sales visit.
Metal usually earns its higher price on Treasure Island when you plan to keep the house, it takes salt and wind head on and the 50% worksheet has room. Shingle often fits better when that worksheet is tight or a rebuild is likely within a few years. Tile can suit a frame built to carry it, though an older house needs checking first. If you only need a fix on the current roof, start with roof repair, and if water is coming in now, roof leak repair stops the active leak.

What You Get on Every Island Metal Roof
The warranty leads. Each roof we finish carries our 15-year workmanship warranty in writing, on top of the manufacturer’s coverage for the panels and finish. We buy direct from manufacturers, so the panels, trim and underlayment arrive as a matched system from one manufacturer.
Then the technology: the roof is measured from imagery before anyone climbs a ladder. Then how it feels to you: the permit pulled in our name, cleanup included and one portal for the whole record. Roof Copilot is a Florida certified roofing contractor, license CCC1336568, with liability and workers’ comp coverage.
On Every Island Roof We Install
- Warranty
- 15-year workmanship, in writing, on top of the manufacturer's
- System
- A matched set of parts from one manufacturer, bought direct
- License
- Florida certified roofing contractor CCC1336568
- Coverage
- Liability and workers' comp
From the Causeway to a Finished Metal Roof on Treasure Island
Our crews leave Kenneth City on 54th Avenue North, run south on 66th Street North to Pasadena Avenue North and Central Avenue, then take the Treasure Island Causeway over Boca Ciega Bay to 104th Avenue. It’s about 6.7 miles. From there:
- 01
Measure
We size every slope from imagery and note how the house faces the water.
- 02
Inspect
A free visit checks pitch, deck, flashing and the attic where we can reach it.
- 03
Choose
Metal, shingle and tile on one Good, Better, Best quote, signed on your phone at a locked price.
- 04
Permit and Build
City permit in our name with the 50% worksheet prepared, tear-off, deck photos, barrier, clips and panels, with daily cleanup.
- 05
Close Out
Final inspection, then the closed permit, photos and written warranty in your portal.
The full process is on our roof replacement page, and residential roofing covers the houses we roof across the area. Nearby on the beaches we also serve St. Pete Beach and Madeira Beach. Our home page covers everything we do from Kenneth City, and our other combo page covers roof replacement in West Lealman.
Roofs We're Proud Of





Year workmanship warranty written into the contract, and it sits on top of the manufacturer's warranty for the materials.
We file the permit as the contractor and build the roof to Florida code. There's no paperwork for you to complete.
Every scrap of the torn-off roof goes in our trailer, and we sweep the lawn and driveway with a magnet to catch loose nails.
Florida certified roofing contractor CCC1336568, insured with general liability and workers' comp.
Break the total into monthly payments and get the new roof on now, without saving up first.
Treasure Island Metal Roof Questions
Does Choosing Metal Make It Harder to Stay Under Treasure Island's 50% Line?
It puts a larger number on the worksheet, since metal costs more than shingle. For most houses a roof alone stays well below half the structure's value. Where it can matter is an older house with a modest building value or one with other permitted work. We give you the metal and shingle prices in writing early, and we ask the permit office how earlier work is treated.
Why Is My Address Number Written on the Plywood in the Job Photos?
Treasure Island's roof affidavit asks for a photo of each roof plane with the permit number or address number marked on the deck. The mark proves the picture was taken on your house during your job. Under metal, those photos are the only record of the nailing, so we keep a copy in your portal too.
My Duplex Shares a Roof with the Unit Next Door. Can Only My Half Go Metal?
Usually not. One roof over two homes is normally replaced as one, with the same panel, finish and color end to end. Talk with the other owner first, and if there is an association, check its documents. We can measure the whole roof and price it for both of you at once.
How Often Should an Island Metal Roof Be Rinsed?
Rain cleans the open slopes. The spots that matter are the ones it misses, like the underside of a porch roof or panels tucked under a second story. A gentle rinse with a garden hose a few times a year, never a pressure washer, keeps salt from building up. Some finish warranties list rinsing as owner upkeep, so we show you what yours says.
We're Building New After Helene. When Do You Need the Plans?
Before the framing is final. Roof pitch, overhang depth and the ridge line all affect how standing seam lays out, and they cost almost nothing to adjust on paper. Send the plans and we'll price the roof in metal, shingle and tile from them.
Is the Metal Roof I'd Get on Treasure Island the Same One You Put on in Kenneth City?
The method is the same. Standing seam, tear-off to bare wood, deck repair and clips. The materials list changes. Close to salt water we lean toward aluminum panels, the most salt-tolerant finish and fasteners that won't react with the panel metal. Your quote names each choice and why.

Get Your Treasure Island Roof Measured, Free.
Enter your address. We'll handle everything else.